NorthStar Navigation Multi-Function Unit M84 - Manual (Page 71)

Northstar M121/M84 Installation and Operation Manual 70
19 Setting up the M121/M84
The M121/M84 has a number of advanced
features which are set up through the setup
menu. We recommend that you become
familiar with the operation of the unit using the
default settings before making any changes in
these menus.
To go to a setup option menu, press
SETUP
(M121 only) or press
MENU
twice, to display the
setup menu, then select an option.
Note:
1 The Setup menu options are explained in
the following sections.
2 Section 2-1 describes how to set or change
data in the setup menus.
3 The setup data available will depend on the
optional sensors and instruments installed.
System Setup (see section 19-1)
Sonar Setup (see section 19-3)
Radar Setup (see section 19-4)
GPS Setup (see section 19-5)
Fuel Setup (see section 19-6)
Track Setup (see section 19-7)
Logs Setup (see section 19-9 )
Alarms Setup (see section 19-10)
Units Setup (see section 19-11)
Comms Setup (see section 19-12)
Calibrate Setup (see section 19-13)
Time Setup (see section 19-14)
Simulate Setup (see section 19-16)
Favorites Setup (see section 19-15)
Chart General Setup (see section 19-2)
Chart Water Setup (see section 19-2)
Chart Land Setup (see section 19-2)
Chart Other Setup (see section 19-2)
AIS Setup (see section 19-8)
Chart Setup (see section 19-2)
See the SmartCraft Gateway Instalation
and Operation Manual