beautypg.com

Replacing the backplane – Polycom KIRK KWS8000 User Manual

Page 19

background image

Replacing Components

2–3

7

Plug the interface cables into the card.

8

Connect power and reboot the unit.

Replacing the Backplane

The backplane cannot be replaced on-site. The chassis will have to be returned

for repair or be replaced with a new one. If a new chassis is to be installed, you

can move the cards from the faulty chassis to the new one.

To Replace an AC Adapter.

>>

Check to see if unit has a backup supply attached. If yes, then unplug the

faulty one and replace it with a new one.

>>

If the unit has no backup supply, plug the new AC adapter into the

appropriate backup plug and remove the faulty AC adapter.

See also other documents in the category Polycom Computers: