Philips S890 - Manual (Page 53)

52 User Profiles
13. User Profiles
Your mobile phone provides a number of user profiles for
you to set your mobile phone's ring tone, according to
condition and environment.
From the main menu, press the navigation keys to scroll
and select
User Profiles . Press L to enter the User
Profiles menu, where you will be able to access the
following: General , Meeting , Outdoor , Indoor or Headset .
These five profiles have already been set and the default
profile is General. In standby mode, press and hold
# to
quickly turn silence mode on or off; same with opening or
closing of the vibrator.
Press + / - to scroll and select the required profile, then
press L Option :
General for use under general conditions.
Meeting for use in meetings. This requires
presetting (for example, set
Alert Type
to Vibration Only ).
Outdoor for use during outdoor activities.
This requires presetting (for
example, you can set a higher ring
volume).
Indoor for use during indoor activities. This
requires presetting.
Headset for use during headset activities. This
mode will be activated when the
earphone is inserted. This requires
presetting (for example, you can set a
lower ring volume).
Activate activate the selected profile.
Customize set your profile and select the
corresponding settings. Select
Customize , and press L OK to
display the following menu
options:
•
Tone Setup : customize different
ring tones with different options,
for example, cover open or close,
power on or off, etc.
• Volume : Two types of volume can
be set: Ring Tone (including
incoming call, alarm, power on,
power off, cover open, cover
close, message tone) and
Key Tone
(associated with key presses).