Philips S890 - Manual (Page 31)

30 Messages
Message Settings
The user must make the necessary settings in order to
use the MMS feature.
Enter
MMS Settings and carry out the following
settings:
Delete delete the current MMS.
Delete All delete all the MMS in the drafts
folder.
Use Number extract the number of the sender
and recipient,
Dial or Save To Phone
Book .
Sending set sending parameters as follows:
•
Validity period : set the duration that
the current MMS will be saved in
the MMS centre (this is
dependent on the service provided
by your network operator). You
can select
1 Hour , 12 Hours , 1 Day ,
1 Week or Max using < / > . Max
duration is determined by the
MMS service centre.
• Read report : feedback as to
whether or not the recipient has
read the MMS.
• Delivery report : feedback as to
whether or not the MMS has
been successfully sent to the
recipient.
• Priority : set the priority of the
current MMS. This includes
Normal , High and Low .
• Slide Timing : control the default
display time of the page. You can
enter a number between 1 and 60.
• Delivery time : set the duration for
resending - Immediate , In one
hour , In 12 hours or In 24 hours .
Retrieval set the retrieval parameter as follows:
•
Home network : set the degree of
emergency in the downloading of
MMS. If you select
Immediate , the
MMS will be downloaded
immediately when it arrives; if
you select
Delayed , you will be
notified that you have received a
new MMS and you can decide
whether or not to download. You
can select
Restricted to reject the
receipt of MMS.