Philips VR388-55 - Manual (Page 8)

— 9 —
G
ETTING
C
ONNECTED
U
P
VCR to TV Connection
Connection
Diagram
1 Disconnect the antenna or Cable from the TV and the AC power
cord of the TV from the AC outlet.
2 Connect the antenna or Cable to the VCR.
3 Connect the VCR to the TV using the RF coaxial cable.
4 Plug the AC power cords of the VCR and TV into the AC out-
lets.
Outdoor antenna Indoor antenna
Back of VCR
RF coaxial cable
(supplied)
Back of TV
CAUTION
Do not plug the AC power cords until all
connections are completed.
To watch a picture from this VCR on the TV, select UHF E36
channel (video channel of this VCR when shipped from the factory).
If you want to change video channel, see “Setting the Video Chan-
nel” (✈.P10).
VCR to AV TV Connection Using SCART Cable
With this connection, you can get better pictures and sounds when playing back a tape.
To watch a picture from this VCR on the
TV, select the video input on the TV, to which
this VCR is connected.
Use the appropriate SCART cable depending
on the TV’s AV terminal.
VHF
UHF
ANTENNE SORTIE
RF. OUT
ENTREE ANT.IN
002
AV1 ENTREE/SORTIE
IN/OUT
ANT. IN
RF OUT
Cable
ANTENNE SORTIE
RF. OUT
ENTREE ANT.IN
002
AV1 ENTREE/SORTIE
IN/OUT
Back of TV
Back of VCR
To AV
terminal
SCART cable
To AV1 IN/OUT terminal
OUT
IN: (Not used)
VR388/588-55 EN (N) 6/1/99, 9:02 AM 9