Philips VR388-55 - Manual (Page 3)

— 4 —
Remote Control (For VR588/55)
VCR TV
VCR/TV POWER EJECT
CH VOL SKIP SEARCH
STILL/SLOW
EXIT/STATUS
START
DAILY DBS
SPEED CLEAR
1 2 3
4 5 6
7 8
0
9
WEEKLY
STOP DATE
INDEX /OTR
TIMER
SLOW/
FORWARD SLOW/BACK
MENU
- +
/OK PLAY
STOP
CBL / DBS
QUICK PROGRAMMING
-
+
-
+
REC AUDIO/MUTE
3
1
2
4
5
6
7
8
9
10
11
13
12
14
15
16
17
18
19
20
21
22
24
23
25
Using this remote control to
operate other components
You can use this remote control to
operate some of the PHILIPS TVs.
D
ESCRIPTION OF
C
ONTROLS (C
ONTINUED
)
9 EXIT/STATUS button
Before using this button, press VCR .
• After pressing VCR :
– Displays the time counter, present
time, channel number, and
remaining tape length. (✈P.16)
– Exits from menu operations when
using the menus. (✈P.11)
10 SPEED button
Selects the tape speed for recording (SP,
LP or SLP). During playback, the tape
speed is automatically selected (SP, LP,
or SLP). (✈P.14, P.17)
SP, LP
: For PAL signal.
SP, SLP : For NTSC signal.
11 REC (record)/OTR button
• Start recording when pressed once.
(✈P.14)
• Starts a recording for 30 minutes to 9
hours long. When pressed more than
once, the shut-off time increases in
30-minute intervals. (✈P.15)
12 TV button
Makes the remote control ready for
operating the TV.
13 VCR button
Makes the remote control ready for
operating the VCR.
14 EJECT 0 button
Ejects the cassette. (✈P.14)
15 CH (channel)
5 / ∞ button
Before using this button, press VCR or
TV .
• After pressing VCR , changes the
channels on the VCR. Release at a
desired channel.
For some Philips TV only:
• After pressing
TV , changes the
channels on the TV. Release at a
desired channel.
16 PLAY 3 / 5 button
Before using this button, press VCR .
• After pressing VCR :
– Starts normal playback. (✈P.14)
– Moves up the cursor when using
the menus. (✈P.11)
1 CBL/DBS button
Does not function for this model.
2 POWER button
Before using this button, press VCR or
TV to select your target component.
• After pressing VCR :
– Turns the VCR on or off.
– Sets the VCR for an unattended
recording (timer recording) after
timer settings are completed.
(✈P.18)
For some Philips TV only:
• After pressing
TV , turns the TV on or
off.
3 VCR/TV button
Does not function for this model.
4 SKIP SEARCH button
Skips playback for 30 seconds by time
counter reading.
When pressed more than once up to 4
times, the search time increases in 30-
second intervals up to 2 minutes.
(✈P.16)
5 VOL (volume)
5 5 5 5 5 / ∞ ∞ ∞ ∞ ∞ buttons
For some Philips TV only:
Changes the TV volume.
Release at desired volume.
6 STILL/SLOW button
Stops the tape during recording (pause)
or playback (still picture) temporarily.
(✈P.14, P.16)
Press again to resume normal recording.
Press
PLAY 3 to resume normal
playback. Activates slow motion picture
when pressed for more than 2 seconds
during playback.
7 1 (Rewind) / 2 button
Before using this button, press VCR .
• After pressing VCR :
– Rewinds the tape. Also, during
playback, starts rapid reverse
visual search. (✈P.14)
– Goes back to the previous menu
screen when using the menus.
(✈P.11)
8 SLOW/BACK – button
During a slow motion picture, adjust the
playback speed in the reverse direction.
(✈P.16)
VR388/588-55 EN (N) 6/1/99, 9:01 AM 4