Planar LC12 - Manual (Page 5)

Title: Product Specification: LC12 High-Bright Monitor Page 5 of 24
Document Number: 023-0284-01 Revision: A
2.0 Basic Construction
2.1 Weight
Monitor weight does not exceed 5 Kgs (11 lbs).
2.2 Mechanical Mounting Requirements
Per Planar Mechanical Outline drawing 074-0666-01
2.3 Monitor Electronics
Electronic components requiring heat sinks are installed independent of the Monitor enclosure.
That is, its sheet metal chassis is not used as a heat sink for any electronic component.
2.4 Cooling Fan
Cooling fans are installed to maintain appropriate internal operating temperatures when the
Monitor is subjected to its operating environment of Section 3. Forced air convection is used to
cool the LCD Panel (front and back).
2.5 Vandal Glass
The Monitor is designed to operate with a vandal glass 289 mm x212 mm x 10 mm in place. This
vandal glass in not provided with the Monitor.
2.6 Air Filtration
An air filter mesh is included to prevent ingress of insects and ensure continual flow of cooling air
within the Monitor. The air filter mesh is externally accessible for cleaning.
2.7 Connectors
There are two (2) connectors supplied as an integral part of the Monitor.
2.7.1 Video Signal Connector
The Monitor unit includes a chassis mounted 15-pin female mini D-Shell connector
(AMP 748390-5 or equivalent) with socket contacts at the rear of the Monitor. It is
shielded for electromagnetic interference (EMI) purposes. Refer to Section 4.1 for
electrical connections.
2.7.2 DC Power Input Connector
The DC power input connector is a chassis mounted 2-pin "MAT?N?LOK" style
connector (AMP 1-480699-0 or equivalent) with pin contacts at the rear of the
Monitor. Connections are insulated to insure no accidental contact.