Planar LC12 - Manual (Page 16)

Title: Product Specification: LC12 High-Bright Monitor Page 16 of 24
Document Number: 023-0284-01 Revision: A
0-amp
5-amp
10-amp
15-amp
20-amp
25-amp
Time Scale: 10-msec / div
3-amp (max) steady-state
11-amp (max)
25-msec (max)
Stabilization
1-msec (max)
Initial inrush current
Power Supply Limit
Figure 9. Current Profile: Note 3 amp figure is incorrect; use 4.3 amp as specified above.
5.3 Power On-Off Sequences
The Monitor will automatically return to normal operation upon resumption of power after a
power loss.
6.0 Display Performance
6.1 Display Luminance
The display provides one level of luminance used for both daylight and night viewing.
Minimum white-light luminance at the screen center of the Monitor face is 1500 cd/m 2 [467 fL] in
a darkened room environment with ambient light conditions less than 10 LUX [1fC] incident
illumination and at room temperature. Reference: MIL-L-85762A (3.10.2.2.3). Luminance
specification applies to the initial luminance, i.e. prior to additional operation in the end system.
Luminance
min
? > 1,500cd/m 2 [467 fL]
6.2 Display Contrast
Display contrast is a relationship between luminance levels and the ability to perceive a
luminance difference. It is expressed as a ratio of ON white – luminance to OFF black background
luminance generated by the display.
4.3 amp (max) steady -state