Pride Mobility Traveller Plus HD - Manual (Page 29)

29 Elite Traveller Plus/Plus HD www.pridemobility.com
V I . C O M F O R T A D J U S T M E N T S
Figure 19. Front Storage Area
SCREWS REMOVABLE
STORAGE
AREA
Figure 18. Seat Height Adjustment
UPPER SEAT POST
LOWER SEAT POST
DETENT PIN
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights. See
figure 18.
1. Remove the seat and battery pack from your Travel
Scooter.
2. Use the attached ring to pull and remove the detent
pin from the lower seat post.
3. Raise or lower the upper seat post to the desired
seat height.
4. While holding the upper seat post at that height,
align the adjustment holes of the upper and lower
seat post.
5. Fully insert the detent pin.
6. Replace the battery pack and seat.
FRONT STORAGE AREA
Your Travel Scooter is equipped with a front storage
area that can be removed if additional leg or foot room
is needed. See figure 19. Remove the screws to
separate the storage area from the Travel Scooter.
NOTE: As a precaution, avoid placing wallets,
keys, or valuable items in the storage area.