Polaroid PDC 5350 - Manual (Page 23)

22 Polaroid PDC 5350 Digital Camera User Guide
www.polaroid-digital.com
23 Polaroid PDC 5350 Digital Camera User Guide
www.polaroid-digital.com
4. Align the Focus mark or the optical viewfinder
centre on the subject you want to capture.
Press the Shutter button halfway to set the
exposure and focus. The camera automatically
detects the subject and highlights the auto
focus mark in blue from one of the five
available focus points, which it will use to
determine the focus. The Focus LED remains
steady, indicating the camera focus is locked
on the subject.
Focus Mark
NOTE:
• Single picture mode is the default setting.
• The icon will appear when the shutter speed is slow, which reminds you
to hold the camera steady or use a tripod.
• The LCD screen will show you the aperture value and the shutter speed at
which you take the picture.
• The camera is always ready to take pictures or videos even if you are in the
Menu or Playback mode. Pressing the Shutter button half way in either the
menu or playback modes will quickly switch the camera to the capture or
video mode (depending on where the Mode Dial is set).
• When the Focus LED blinks and the red focus mark appears on the LCD
screen (when it is on), there is difficulty in focusing the subject. Release
the Shutter button, recompose the scene and press the Shutter button
halfway to reset the focus.
5. Hold the camera steady. Press the Shutter button completely down
to take a picture.
6. If the Quickview is set to 2 Sec/10Sec, the picture just taken will
be shown on the LCD screen (it is turned on) for 2 seconds or 10
second.
The Operation LED and Flash Charge LED (if the Flash is used) will blink,
which indicates the camera is processing the picture and is charging the
Flash. You can take the next picture only when the Operation LED and
Flash Charge LED stop blinking.