PhatNoise Car Audio System User Manual

Page 16

Text mode
Original mode

6. When the installation is finished, the setup program will ask you

to reboot the computer.

7. Once rebooted, plug the power connector into the USB cradle.

Make sure the other end of the power cable is plugged into a
wall outlet before connecting the USB cradle to your computer.

8. Connect the USB cradle to a USB port on your PC. (We

recommend that if your computer does not already support USB
2.0, that you purchase a USB 2.0 PCI adapter card to take
advantage of the much faster transfer speed).

9. Insert the DMS cartridge firmly into the USB cradle. Avoid

‘slapping’ the cartridge into place. The green and red indicator
lights should illuminate. The DMS cartridge will then be detected
by the operating system.

10.

After an initialization period, an “Autoplay” dialog box will

appear:

Page 16