Pantech PN-215 - Manual (Page 69)

C
H
4
67
SETTINGS
C
H
4
66
SETTINGS
1 Press [MENU], then select “Settings & Tools”
menu, press “Call Settings” then select
“Auto Retry”.
Automatically redials a call up to 5 times after a set time interval.
2
3
Retry time to field is shown. Press the Navigation
Key left or right to choose the amount of time.
(Off, 3 Seconds, 5 Seconds, 7 Seconds or
10 Seconds)
When a time is chosen for retry time, the repeat
field is shown. Press the Navigation Key down to
highlight the repeat field. Press the Navigation
Key left or right to choose the number of
repeats. (1 time, 3 times or 5 times).
4 To save, press .
AUTO RETRY
1 Press [MENU], then select “Settings & Tools”
menu, press “Call Settings” then select
“TTY Mode”.
Your phone is able to operate with a TTY (Teletypewriter) digital
modes. This feature is system dependent and may not be available
in all areas.
3 To save, press .
TTY MODE
2 Select one of the following with the Navigation Key.
TTY Off, TTY+ TALK, TTY + HEAR, TTY Full l
Enhances voice privacy and avoids tapping during a call.
Enhanced : Makes it more difficult to wire tap. l
1 Press [MENU], then select “Settings & Tools”
menu, press “Call Settings” then select
“One Touch Dial”.
ONE TOUCH DIAL
2 Select “On” or “Off” with the Navigation Key then
press to save it.
1 Press [MENU], then select “Settings & Tools”
menu, press “Call Settings” then select
“Voice Privacy”.
VOICE PRIVACY
2 Select “On” or “Off” with the Navigation Key,
then press to save it.
1 Press [MENU], then select “Settings & Tools”
menu, press “Call Settings” then select
“Data Setting”.
Choose the connection mode for the usage of your phone.
3 To save, press .
DATA SETTING
2 Select one of the following connection modes
with the Navigation Key.
Voice Call : To receive a voice call.
Data Only : To receive data when connected to PC. l
l