Pantech PN-215 - Manual (Page 22)

BASIC FUNCTIONS
C
H
2
21
C
H
2
20
BASIC FUNCTIONS
MAKING A CALL
1 Enter a phone number.
To modify the phone number you have entered :
• To erase one digit at a time press .
• To erase the entire number, press and hold .
To send the TXT or PIX message with phone number :
• To enter a part of the phone number, then press
[OPTIONS], select “New TXT Msg or New PIX Msg”.
Please refer to page 95 or page 96 for more details on
“Send New TXT Message or Send New PIX Message”.
2 Press .
The indicator, , appears on the display.
• If “CALL FAILED” appears on the display or the line is busy,
press or .
• If you activate the “AUTO RETRY” function, the phone will
automatically retry for the number of times you have
selected. (refer to page 66).
• When you place or receive a call from stored phone
numbers, the saved name will be displayed.
• There is another way to make a call through the VR mode,
which is called “VAD (Voice Activated Dialing)”.
Please refer to page 68 (Voice Service) for more details.
• If “Enter Lock Code” appears on the display enter your
4-digit password to unlock your phone.
3 To end a call, press .
To ignore incoming calls, press [IGNORE].
ANSWERING CALLS
1 When your phone rings or vibrates, press
to answer the incoming call.
(Depending on your phone’s settings, you may
also answer incoming calls by opening the
phone or by pressing any digit key.)
2 To end a call, press .
The speaker phone feature lets you hear audio through the speaker and
talk without holding the phone.
SPEAKER PHONE
1 To activate the speaker phone in idle, answering
or calling modes, press .
2 The phone returns to normal (Speaker Phone Off)
after ending a call or when the phone is turned off
and back on.