Philips FW-P78 - Manual (Page 23)

3139 116 19452 (ENG)
23
TIMER STEREO
FM BACK HSD REPEAT LW MW AM T.A. NEWS
SOUND NAVIGATION
DIGITAL SOUND
CONTROL
DYNAMIC BASS
BOOST
TAPE CD
PROG
CLOCK/
TIMER NEWS!
RDS
DOLBY B NR
DUB (HSD)
REC
STANDBY
ON
SIDE A•B A.REV
TUNER AUX
PRESET ▲ ▲
STOP • CLEAR SEARCH • TUNING PLAY PAUSE PREV NEXT
MINI HIFI SYSTEM
C D 1 • 2 • 3 CDR / VIDEO FM • AM TAPE 1 • 2
FRONT
60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz
VOLUME
REC PROGRAM
S S
L R
C
PRO LOGIC
SIDE
SWITCH OFF DOLBY PRO
LOGIC WHEN RECORDING
Notes:
– It is not possible to change tape side
during recording.
– For recording, use only tape of IEC type
I (normal tape) or IEC type II (Cr02).
– The tape is secured at both ends with
leader tape. At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
– The recording level is set automatically,
regardless of the position of Volume,
DBB or DSC.
– To prevent accidental recording, break
out the tab on the left shoulder of the
tape side you want to protect.
– If “ CHECK TAPE” is displayed, the
protection tab has been broken. Put a
piece of clear adhesive tape over the
opening. Do not cover the Cr02 tape
detection hole when covering the tab
opening.
Digital Recording via
Digital Out
For CD digital recording, please refer to
the Instructions Manual of the CD
Recorder, digital audio equipment, etc.
RECORDING
One Touch Recording
• For One Touch Recording, as soon as
you press REC, the current source
(CD, TUNER or AUX) will be
recorded on tape deck 2.
1 Load a blank tape in tape deck 2.
2 Press REC to start recording.
™ The REC starts flashing.
3 Press Ç to stop recording.
Note:
– When you press RECORD while in
TAPE mode, " SELECT SOURCE"
will be displayed. One Touch Recording
is not possible in TAPE mode.
CD Synchro Start
Recording
1 Load a blank tape into tape deck 2
and a disc into a disc tray.
2 Press CD to select CD mode.
• You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If not,
select the disc by pressing
CD
(CD 1•2•3) and the tracks are
recorded according to the order on
the selected disc.
3 Press REC to start recording.
™ The REC starts flashing.
• CD will start playback automatically.
4 Press Ç to stop recording.
pg 01-28/P78/37-Eng2 12/20/99, 2:24 PM 23