beautypg.com

Operating the system, Easy set, Switching the system on – Philips FW-P78 User Manual

Page 15: Switching the system to standby mode, Demonstration mode

background image

3139 116 19452 (ENG)

15

OPERATING THE SYSTEM

Notes:
– When the system is switched on from

the main power outlet, the CD carousel
tray may open and close again to
initialize the set.

– Even though the AC power cord is

removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.

To start the demonstration mode
• Press and hold Ç(on the system

only) for five seconds when the
system is in standby mode.
™ The demonstration will begin.

Easy Set

EASY SET allows you to store all
available radio stations automatically.

• Press and hold

STANDBY ON (on

the system only) for five seconds
when the system is in standby or
demonstration mode.
™ “EASY SET” will be displayed,

and followed by “

TUNER” and

then “

AUTO”.

™ EASY SET will start searching for

all radio stations on FM band and
then followed by radio stations on
AM band.

™ All available radio stations with

sufficient signal strength will be
stored. Up to 40 presets may be
stored.

Notes:
– EASY SET will start with the FM band,

if there are still presets available, the
system will continue to store the AM
band.

– When EASY SET is used, all previously

stored radio stations will be replaced.

– The last preset radio station will

appear on the display when EASY SET
is completed.

Switching the system ON

• Press

CD, TUNER, TAPE or AUX.

You can also switch on the system by
pressing any one of the CD DIRECT
PLAY buttons.

Switching the system to
standby mode

• Press

STANDBY ON or B on

the remote control.
™ The system will switch to standby

mode.

™ About five seconds later, the

system will go into an energy
saving mode if the demonstration
mode has been disabled.

Important:
Before you operate the system,
complete the preparation
procedures.

Demonstration mode

The system has a demonstration mode
that shows the various features offered
by the system. When the system is
switched on for the first time, the
demonstration mode will start
automatically.

Notes:
– During the demonstration, if you press

any source (or standby-on) button, the
system will switch to the respective
mode (or standby).

– When the system is switched to

standby mode, the demonstration will
resume five seconds later.

To stop the demonstration mode
• Press and hold Ç(on the system

only) for five seconds when the
system is in demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby

mode.

™ About five seconds later, the

system will go into an energy
saving mode ( < 2 watts ). The
low power STANDBY ON LED
will be lit.

FM

STEREO

BACK

HSD

REPEAT

REC

LW

MW

AM

T.A.

NEWS

SOUND NAVIGATION

DIGITAL SOUND

CONTROL

DYNAMIC BASS
BOOST

TAPE

CD

PROG

CLOCK/
TIMER

NEWS!

RDS

DOLBY B

NR

DUB

(HSD)

REC

STANDBY
ON

SIDE

A•B

A.REV

TUNER

AUX

PRESET ▲

STOP • CLEAR

SEARCH • TUNING

PLAY PAUSE

PREV

NEXT

MINI HIFI SYSTEM

C D 1 • 2 • 3

CDR / VIDEO

FM • AM

TAPE 1 • 2

TIMER

FRONT

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

VOLUME

SHUFFLE

PROGRAM

S

S

L

R

C

PRO LOGIC

SIDE

pg 01-28/P78/37-Eng2

12/20/99, 2:23 PM

15

This manual is related to the following products: