Philips FW-P78 - Manual (Page 13)

3139 116 19452 (ENG)
13
Controls on the system
and remote control
1 STANDBY ON
–
to switch the system on or to
standby mode.
– to use for EASY SET.
2 LOW POWER STANDBY
LED
– lights up during low power standby.
3 DIGITAL SOUND
CONTROL (DSC)
– to select the desired sound effect :
OPTIMAL, CLASSIC, TECHNO,
JAZZ, ROCK or VOCAL.
4 n
–
to connect headphones.
5 REC (RECORD)
–
to start recording on tape deck 2.
6 DUB (HIGH SPEED
DUBBING [HSD])
– to dub a tape in normal or fast
speed.
7 JOG
–
to select the desired equalizer
display.
– to select the desired DSC setting.
You must select the DSC feature
first.
8 PROG (PROGRAM)
for CD ............ to program CD
tracks.
for TUNER ... to program preset
radio stations.
for CLOCK .. to select 12 or 24
hour in clock setting
mode (on the system
only).
9 CLOCK/TIMER
–
to view the clock, set the clock or
set the timer.
0 DISPLAY SCREEN
–
to view the current setting of the
system.
! CD CAROUSEL TRAY
@ DISC 1 / DISC 2 / DISC 3 (CD
DIRECT PLAY)
– to select a CD tray for playback.
# DISC CHANGE
–
to change CD(s).
$ OPEN•CLOSE
–
to open or close the CD carousel
tray.
% SOURCE – to select the
following:
CD / (CD 1•2•3)
– to select CD mode. When CD
playback is stopped, press to select
disc tray 1, 2 or 3.
TUNER / (FM•AM)
– to select Tuner mode. When in
tuner mode, press to select the
waveband: FM or AM.
TAPE / (TAPE 1• 2)
– to select Tape mode. When tape
playback is stopped, press to select
either tape deck 1 or 2.
AUX / (CDR/VIDEO)
– to select sound from an external
source (e.g. TV, VCR, Laser Disc
player, DVD player or CD
Recorder). When in Aux mode,
press to select either AUX or CDR.
TV (only on the remote control)
– to select TV mode.
^ DPL DISPLAY PANEL
–
to view the selected Dolby Pro
Logic setting.
& DOLBY PRO LOGIC (DPL)
–
to select Dolby Surround, Dolby
Center Phantom, Dolby 3 Stereo
or Stereo mode.
* A. REV (AUTO REVERSE)
–
available in tape deck 2 only.
– to select the desired play modes
(
å / ∂ / ∫ ).
( MODE SELECTION
SEARCH а б
(TUNING а б )
for CD ............ to search backward/
forward.
for TUNER .... to tune to a lower or
higher radio frequency.
for TAPE ......... to rewind or fast
forward a tape.
for CLOCK .. to set the hour (on
the system only).
for TV VOL. .. to adjust the TV
volume if the remote
operates your TV.
STOP•CLEAR Ç
for CD ............ to stop CD playback
or to clear a program.
for TUNER ... to stop programming.
for TAPE ......... to stop playback or
recording.
for DEMO .... (on the system only)
to start or stop
demonstration mode.
PLAY É / PAUSE Å
for CD ............ to start or interrupt
playback.
for TAPE ......... to start playback.
í PREV / SIDE / NEXT ë
(PRESET
4 3 )
for CD ............ to skip to the
beginning of the
current, previous, or
next track.
for TUNER ... to select a preset
radio station in
memory.
for TAPE ......... to select tape side
(back or front) in
tape deck 2 only.
for CLOCK .. to set the minute (on
the system only).
) VOLUME
–
to increase or decrease the
volume.
¡ DYNAMIC BASS BOOST
(DBB)
– to select a bass boost level or to
switch off bass boost.
CONTROLS
pg 01-28/P78/37-Eng2 12/20/99, 2:23 PM 13