Patton electronic 3088 - Manual (Page 38)

38
Figure 16 is a screenshot of opening a typical remote console session:
Figure 16. Opening a typical remote console session
How to Disconnect
The remote console session ends under any of the following conditions:
• The user enters the command logout
• A timeout period of 5 minutes elapses since the user has entered a
command to the console.
• The DSL link drops.
The response upon logging out of the remote console session with the
command logout is
Console: Remote console connection lost. The fol-
Log in to 3088 (Near End)
system show status command
shows that DSL link is not up
remote console command requests a
remote console session on 3088 (Far End)
Message informs us that the 3088 (Far
End) did not respond and a remote
console session was not opened
system show status command shows
that the DSL link state is success
remote console command requests a
remote console session on 3088 (Far End)
Message informs us that we are now
connected to the 3088 (Far End) console
We can now enter commands on
the remote console