Panasonic DMR-E55 - Manual (Page 11)

11
RQT7301
Ge
tt
in
g s
ta
rte
d
w If the clock is an hour slower or faster than the
actual time
Select “ U1” or “T1” in “Time Zone Adjust” in the SETUP menu
( ➡ page 38).
w If the unit couldn’t set the clock automatically
Set the time manually ( ➡ page 38, Manual Clock Setting).
w To start Plug-in Auto Tuning again (after
relocation, for example)
When the unit is on and stopped
Press and hold [: CH] and [9 CH] on the main unit for
about five seconds.
The unit turns off.
Press [¦ DVD POWER] to turn the unit on.
1
Press [SETUP].
2
Press [ , ] to select “Channel” and
press [ ].
3
Press [ , ] to select “Antenna
System” and press [ENTER].
4
Press [ , ] to select “TV” or
“CATV” and press [ENTER].
5
Press [ , ] to select “Auto Channel
Setting” and press [ENTER].
6
Press [ENTER].
Auto Channel Setting starts. This takes a few minutes.
7
Press [ENTER].
To cancel partway
Press [RETURN].
To exit the screen
Press [SETUP].
Add or delete channels if necessary channels are not set or
unnecessary channels are set.
1
Press the numbered buttons to select
a channel.
TV Mode (Airwaves)
e.g., 5: [0]
➡ [5]
15: [1] ➡ [5]
CATV Mode (Cable)
e.g., 5: [0]
➡ [0] ➡ [5]
15: [0] ➡ [1] ➡ [5]
115: [1] ➡ [1] ➡ [5]
pYou can also use [9 : CH] when you are going to delete a
channel.
2
Press [ADD/DLT].
e.g., The channel is deleted.
Antenna system, channel caption, and VCR Plus T guide
channel settings all revert to the default values when you
perform the procedure below. Timer recording settings are
also cleared.
If Plug-in Auto Tuning fails
Antenna System
Auto Channel Setting
Channel Captions
Preset Channel Captions
Manual Channel Captions
VCR Plus i CH Setting
CATV
Channel
SETUP
Set Up
Disc
Video
Audio
Display
TV Screen
SETUP
Set Up
Video
Audio
Display
TV Screen
Channel
Antenna System
TV
CATV
Disc
Adding and deleting channels
CH
Unit’s display
CHANNEL 15 DELETED