Panasonic SC-AK600 - Manual (Page 23)

23
Timer and other operations
RQT6243
A
B
1
2
3
4
–AUTO OFF
TEST EST CH SELECT CH SELECT CH H LE VE VEL
SUBWOOFER SUBWOOFER
7 8 9 0
DIS DISPL AY AY DI DIMME MER PL AY AY MODE PRO GR AM
4 5 6 10
MU MUTING PRESET T EQ
CL CLOCK CK
TIMER TIMER
PLAY
REC REC
SLEEP SLEEP
AUTO OFF TO OFF
DISC 1 2 3
TUNER UNER CD
S.SOUND EQ S.SOUND EQ
VOLUME VOLUME
TAPE PE
DE DEL AY AY
PL
AUX AUX
DIGITAL-IN DIGITAL-IN
REW FF
SLEEP
AUTO OFF
REW FF
CLOCK
TIMER
CLOCK
TIMER
C
2•4
DEMO STOP,
1
3
STOP
DEMO
Setting the time
Remote control only
This is a 12-hour display clock.
This example in the figure shows how to set the time for 4:25 p.m..
1
Switch on the power.
2
Press [CLOCK/TIMER] to select
“CLOCK”.
Every time you press the button:
CLOCK REC PLAY
3
(within 7 seconds or so)
Press [
g
/REW/
3
] or [
4
/FF/
f
] to
set the present time.
4
Press [CLOCK/TIMER] to finish setting
the time.
The time is set and the original display is restored.
Displaying the clock
Press [CLOCK/TIMER] once when the unit is on or at standby mode.
The clock is shown for about 5 seconds then the previous display is
restored.
Reset the clock regularly to maintain accuracy.
Previous display
C
Turning DEMO off
A demonstration of the display is shown if you have not set the clock.
You can reduce the power consumed in standby mode by turning it
off.
During standby mode
Press and hold [ L STOP, –DEMO] until “NO
DEMO” is displayed.
The display changes each time the button is held down.
NO DEMO (off)
↔ DEMO ON (on)
To show a demonstration of the display
Press and hold [ L STOP, –DEMO] until “DEMO ON” is displayed.
Note
• You cannot turn demo function off when the unit is on.
• You cannot turn demo function on when dimmer ( A page 22) is on.
A
Auto-off function
Remote control only
When CD or tape is selected as the source
To save power, the unit turns off if it is left unused for ten minutes.
This function does not work if the source is tuner, AUX or DIGITAL
input.
Press and hold [–AUTO OFF].
“AUTO OFF” is displayed.
The setting is maintained even if the unit is turned off.
If you select tuner, AUX or DIGITAL input as the source, “AUTO OFF”
goes out. It comes on again when you select CD or tape.
To cancel
Press and hold [–AUTO OFF] again.
B