POLAR M71ti - Manual (Page 19)

19
4. Press MODE to move onward to user-defined Target
Zone limits.
LIMIT is displayed.
The upper and lower limit values are flashing.
5. Press SET/START/STOP to start setting the Target Zone
limits.
The upper limit value flashes and is ready to be
adjusted.
6. Press /LIGHT to adjust the value.
The digits run faster if you press and hold the
/LIGHT button. Release the button at the desired
value.
7. Press SET/START/STOP to lock your selection.
The lower limit reading starts to flash.
8. Press /LIGHT to adjust the correct value.
9. You have now manually set your Target Zone limits.
Press MODE to move onward.
Both limits are flashing.
The highest possible value for the upper limit is 240.
When the lower limit reaches the upper limit value,
the lower limit will be reset to 10, the lowest
possible setting.