Port-A-Cool SERIES 2000 - Manual (Page 12)

PORT-A-COOL® Hazardous Location Units *
V. TROUBLESHOOTING / REPAIR
A. Troubleshooting
The most common problems encountered with a PORT-A-COOL® unit are operational problems. The
PORT-A-COOL® unit consists of three systems. It is important to determine which system of the PORT-A-COOL®
unit the problem is associated with. Certain problems may be associated with more than one system.
When determining which system that the problem is associated with you must first define the problem,
i.e., the pump is not running. Although this might seem a bit over-simplified, several things may cause a particu-
lar problem. So while defining the problem, a careful check of all systems should be made to fully understand
the extent of the problem.
If you have a complete understanding of all the systems of the PORT-A-COOL® unit and how they depend
on each other, it becomes much simpler to define and solve any problems.
Although the PORT-A-COOL® unit is designed to be simple to maintain, it will be necessary to have some
basic hand tools (screwdrivers, pliers, adjustable wrenches, etc.) as well a volt/ohm meter for troubleshooting
the electrical system.
NOTICE: POWER CORD MAY BE REPLACED ONLY BY THE MANUFACTURER
OR QUALIFIED AGENT!!