Pride Mobility Jazzy 1143 - Manual (Page 16)

Jazzy 1143 16
V . D I S A S S E M B L Y
SEAT REMOVAL
You may wish to remove the seat to transport your Jazzy.
To remove the seat:
1. Turn the power off.
2. Make sure the Jazzy is not in freewheel.
3. Unplug main wire harness behind the seat.
4. Push the lock mechanism forward to loosen seat post (pull back to tighten).
5. Lift the seat up and out of the seat tower.
BODY SHROUD REMOVAL
The body shroud is a one-piece molded plastic body that covers the power base frame. You must remove the body
shroud in order to change the batteries and check the cable connections.
To remove the body shroud:
1. Turn the power off.
2. Make sure the Jazzy’s freewheel lever is engaged. See III. “The Jazzy 1143” in this manual.
3. Unplug the controller wiring harness.
4. Remove the seat.
5. Lift the body shroud straight up. It should lift up easily.
BATTERY REMOVAL
To remove the batteries, see VIII. “Care and Maintenance.”