Panasonic RX-ES20 - Manual (Page 12)

12
RQT5189
7
3
7
1
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
7
2 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
CDs
Program play
Select up to 36 tracks to play in the order you choose.
On the main unit
Preparation: Press [ … TAPE/CD] to switch to CD mode.
■
1 Turn [TIME/PRESET TUNE CD SKIP ] to select
the track.
■
2 Press [•MEMORY * * * * * CLEAR].
Repeat step
■
1 and
■
2 to program other tracks.
■
3 Press [ ¤ / g CD] to start play.
On the remote control
Preparation:
Press [
… ] to switch to CD mode.
1 Press [PGM/ * * * * * CLEAR].
“ ” appears on the display.
2 Enter the track number with the numbered but-
tons.
For tracks numbered 10 and over, press [ ≥ 10] then the two
digits.
Repeat this step to program other tracks.
3 Press [CD] to start play.
The program remains intact even if play is stopped or the unit is
turned off. “Cd-P” appears when play is stopped to indicate the con-
tents are in the memory.
To cancel
Press and hold [ • MEMORY
–
CLEAR] (remote control: [PGM/
* * * * * CLEAR]) in the stop mode until “CLEAR” is displayed.
The mode is also cancelled if the CD tray is opened.
“FULL” is displayed
If 36 tracks have already been programmed.
“– –:– –” is displayed
If the total play time of the program exceeds 100 minutes.
You can still program and play tracks.
■
A To check the program contents (while “Cd-P” is dis-
played)
Turn [TIME/PRESET TUNE CD SKIP ].
On the remote control
Press [
S / 4 4 4 4 4 ] or [ 3 3 3 3 3 / T ].
Listening
Track number Play time
Programmed track Play sequence
7
2
7
3
7
1
TAPE ⁄ CD
C D
2 3 PGM/-CLEAR 1
5 6 ≥ 10 4
8 9 0 7
C RESET RANDOM REPEAT FM MODE/BP
PRESET EQ
S.VIRTUALIZER
PRESET TUNE
CD SKIP
AUTO SCAN
VOLUME
TAPE TUNER CD
REW FF
2
1
3
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2 3 1
5 6 ≥ 10 4
8 9 0 7
Programmed track Play sequence
PGM/-CLEAR
7
A
CD
1
2
3