PYLE Audio PLTVATSC1 - Manual (Page 22)

After accessing the Setup sub-menu, use the navigation buttons to highlight the Time
Zone option, and press the ENTER button to select it. The Time Zone window will appear, as
shown in Figure 24 below. A dot will appear to the left of the current time zone selection.
Use the navigation buttons to highlight the desired time zone and press the ENTER button
to select it.
Sleep
The Sleep sub-menu provides the option of selecting a set amount of time before the DTV will
automatically switch to stand-by mode. There are seven sleep time options: Off and 15, 30, 45,
60, 90 and 120 minutes. A warning popup window will appear on the screen 1 minute before
the set time expires to let the user know that the DTV will soon enter stand-by mode. The user
can then turn off this feature or set a new sleep time amount by accessing this Sleep menu
before the time expires.
After accessing the Setup sub-menu, use the navigation buttons to highlight the Sleep
option, and press the ENTER button to select it. The Sleep window will appear, as shown in
Figure 25 below. A dot will appear to the left of the current sleep time selection.
Figure 24. Time Zone Window
Figure 25. Sleep Window
Use the navigation buttons to highlight the desired time and press the ENTER button to
select it.
21
4. Menu Operation