PYLE Audio PLTVATSC1 - Manual (Page 14)

4. Menu Operation
Figure 8. Channel Sub-menu
13
Auto Program
The Auto Program option is used to automatically scan for available digital channels, and
should be used when powering on the DTV for the first time. Refer to Page 8 for details on how
to perform the Auto Program procedure. If initiated again at a later time, this process will erase
all of the previously saved channels.
Manual Program
The Manual Program option is used to manually scan for available digital channels and to add
additional channels to the list of available channels; it will not affect the previously saved
channels. To use this feature it is helpful to know the broadcast frequency of the channel to be
added, which is different from the channel number. For instance, your “local channel 4 news”
may be on broadcast frequency 35. This is only important to know when adding a channel that
was not detected by the Auto Program function. If you do not know the broadcast frequency
number, see the web site
antennaweb.org (for addresses in the USA.)
After accessing the Channel sub-menu, use the navigation buttons to highlight the Manual
Program option, and press the ENTER button to select it, then select Yes in the Warning text
window. The Manual Program window will appear, as shown in Figure 9 below.
N
e
d
e
rla
n
d
s
Figure 9. Manual Program Window
Channel Menu Features
After pressing the MENU button on the DTV remote control, use the navigation buttons to
highlight the Channel button and press the ENTER button. The Channel sub-menu has two options:
Auto Program and Manual Program, as shown in Figure 8 below.