Panasonic PT-LB51E - Manual (Page 38)

Settings
OPTION menu
E
NGLISH - 38
If you use the projector at high elevation, the HIGHLAND
setting need to be ON to set the fan speed high. Press
I H to select the required option.
OFF The fan speed is low.
ON The fan speed is high.
(480i, 576i, 480p, 576p, 1 080/60i, 1 080/50i, 720/60p
and VGA480 signals only)
This sets the signal that is input to the COMPUTER1 IN
and COMPUTER2 IN/1 OUT connector.
Normally “AUTO” should be selected. RGB or YP
B P R
is
selected automatically depending on the synchronising
signal status.
If an image is not projected correctly, select “RGB” or
“YP
B P R
” in accordance with the input signal.
AUTO automatically
RGB RGB
YP B P R
YP B P R
You can adjust the volume of the sound that is output
from the projector’s built-in speaker and VARIABLE
AUDIO OUT
connector.
You can perform more detailed setting in various items.
J INDEX-WINDOW
This functions in the same way as the INDEX-
WINDOW
button on the remote control unit.
Refer to “Projecting an image in INDEX-WINDOW
mode” on page 27 for details.
J SHUTTER
This functions in the same way as the SHUTTER
button on the remote control unit.
Refer to “Stopping the projection temporary” on
page 26 for details.
J OSD DESIGN
You can change the background colour of the
menu. Press I H to select the required option.
J SXGA MODE
(COMPUTER SXGA signals only)
You can switch the setting between SXGA and the
larger setting, SXGA+. Press I H to select the
required option.
J XGA MODE
(COMPUTER XGA signals only)
You can switch the setting between XGA and the
wider setting, WXGA. Press I H to select the
required option.
J BLACKBOARD
You can exclude the BLACKBOARD in menu
items of PICTURE MODE in PICTURE menu.
Press I H to select the required option.
ON Include the BLACKBOARD in menu
items.
OFF Exclude the BLACKBOARD in menu
items.
J BACK COLOR
You can choose a BLUE or BLACK screen for
when the projector is idle. Press I H to select the
required option.
HIGHLAND
NOTE:
• At 1 400 m (4 593 ft) above sea level, the setting must
be ON.
• The loudness of fan noise depends on the HIGHLAND
setting.
RGB/YP
B
P
R
VOLUME
DETAILED SETUP
TYPE1 Semi transparent black
TYPE2 Solid blue
TYPE3 Semi transparent dark blue