Panasonic CQ-5100U - Manual (Page 27)

CQ-5100U
27
Electrical Connections
❐ Wiring Diagram
Antenna
Accessory Power(ACC)
(+12V DC, negative @ ground
only)
Ground Lead
(Connect to a clean, bare
metallic part of your vehicle)
Battery Lead
(Connect to vehicle battery)
(Red)
ACC
Ground (Black)
(Yellow) Battery
(Violet)
(Violet/Black) (Gray/Black)
(Green)
(Green/Black)
(White/Black)
(Gray) (white)
Left Speaker
(Front)
Right Speaker
(Front)
Left Speaker
(Rear)
Right Speaker
(Rear)
Power Connector
The power connector does not come
along with the unit. If need, please
consult your dealer. ※
1
3
2
Fuse (15 A) Refer fuse
replacement to your nearest
authorized Panasonic
Servicenter. Do not try fuse
replacement by yourself.
Caution
• This wiring information is for experienced technical individual, for safety reason, please your dealer wire this
connection.
• This product is designed to operate with a 12 V DC, negative @ ground battery system.
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle all cables and
keep cable terminals free from touching any metal parts.
• Remember, if your vehicle has a drive computer or a navigation computer, the data of its memory maybe erased
when the battery terminals are disconnected.