Panasonic CQ-5100U - Manual (Page 10)

CQ-5100U
10
Clock Adjustment
The 12-hour system is used for the clock.
Selecting the Clock Display
Press [DISP] (CLOCK) to change the display.
[{ TUNE], [} TUNE]
(Hours, Minutes)
Initial Time
Time Reset
Hold down [DISP] (CLOCK) for more than 2
seconds to active the time setting mode to reset the
time. Then, repeat steps e to y.
Note: Hold down [{] or [}] to change numbers
rapidly.
q Press [DISP] (CLOCK).
“Adj” is displayed when the clock is not adjusted.
w Hold down [DISP] (CLOCK) for more than 2 seconds.
(Hour blinks)
e Adjust the hour.
(Hour set)
Press [}]: sets the hour ahead.
Press [{]: sets the hour back.
r Press [DISP] (CLOCK).
(Minute blinks)
t Adjust the minute.
(Minute set)
Press [}]: sets the minute ahead.
Press [{]: sets the minute back.
y Press [DISP] (CLOCK).
(Completed)
Radio mode display (default)
Clock display