Panasonic WJ-PB65E01 - Manual (Page 2)

2
Major Operating Controls and Their Functions
■ Front View
NETWORK OUT X-1
ALARM OUT 2 ALARM OUT 1
SERIAL VS OUT
VS IN
VS OUT
(THRU)
Video Output Board 1 Only
10/100 BASE-T
q r y t
e
w
q Ethernet Port (10/100BASE-T)
This port is used for connection with Central Processing
Unit WJ-MPU955A via an Ethernet network.
LINK indicator: This indicator lights up when the matrix
switcher is linked to a network through this port.
ACT indicator: This indicator lights up when the matrix
switcher receives or sends data through this port.
w Alarm Output Ports 1, 2 (ALARM OUT 1, 2)
Supplies alarm output signals controlled by Central
Processing Unit WJ-MPU955A.
Note: Refer to WJ-SX650 Series Operating Instructions
for the ALARM OUT port details. (Pin Nos. 3, 5, 7, 9,
12, 14, 16, 18, 36, and 37 are unavailable.)
e VS Input Connector (VS IN)
Accepts a VS input signal from an external device.
r VS Output Loop-thru Connector (VS OUT (THRU))
Loops through VS input signals supplied to e.
t VS Output Connector (VS OUT)
Supplies VS output signals to external devices. While e
is accepting a VS input signal, t supplies an output
signal synchronizing the VS input signal. While e is not
accepting the VS input signal, t supplies an internal
synchronization output signal.
y Serial Port (SERIAL)
Connects to a PC.
LINK indicator
ACT indicator
Features
• With this board, the network connection between
Central Processing Unit WJ-MPU955A and Matrix
Switcher WJ-SX650 Series becomes available to
expand the system composition. Up to 512 cameras
and 64 monitors become connectable.