Panasonic PT-61DLX26 - Manual (Page 37)

37
Basic Operation
Or
1
2
Rapid Tuning
Press to switch to previously
viewed channel or input modes.
Switches between the current and last channel or input
modes.
Projection Display operation
Selecting Input Mode
Press to display the Input select
menu.
Press corresponding NUMBER
keys on the Remote Control to
select the input of your choice.
Press to select the input of your
choice, then press “OK”.
• If, during selection, no action is
taken for several seconds, the Input
selection menu is exited and the
current input is automatically selected.
Component 1
Signal of source connected to
COMPONENT VIDEO INPUT 1 is displayed.
Component 2
Signal of source connected to
COMPONENT VIDEO INPUT 2 is displayed.
HDMI 1
Signal of source connected to HDMI IN 1 is
displayed.
HDMI 2
Signal of source connected to HDMI IN 2 is
displayed.
Video 1
Signal of source connected to INPUT 1 is
displayed.
Video 2
Signal of source connected to INPUT 2 is
displayed.
Video 3
Signal of source connected to INPUT 3 is
displayed.
PC
Signal of source connected to PC IN is
displayed.
Photo (Photo
Viewer)
Signal of source connected to CARD SLOT
is displayed.
Card input mode (Photo Viewer) is selected.
Press to display Photo Viewer
mode.
Note:
• If SKIP is set as the Input Label setting, the mode will not be
changed. (p. 65)
Note:
• When Photo Viewer (p. 54) or Split screen (p. 42) is used,
Rapid Tuning is not available.
• Pressing TV/VIDEO while viewing PC
input will place unit directly into TV
input mode.
[1] TV
[2] Component 1
[3] Component 2
[4] HDMI 1
[5] HDMI 2
[6] Video 1
[7] Video 2
[8] Video 3
[9] PC
Input select