Philips DVDR 77/00 - Manual (Page 46)

38
F
Playback
General notes on playback
With this DVD recorder you can play back the following systems:
•) DVD Video
•) (Super)Video CD Disc
•) DVD+RW Disc
•) DVD+R Disc
•) DVD-RW (video mode, finalised)
•) DVD-R
•) CD-R
•) CD-RW
•) Audio CD
•) MP3 CD
•) Picture -CD (JPEG-data)
You can operate the video recorder using the remote control or the buttons on the front of the
DVD recorder.
aThe display will read 'PIN'
b The child lock has been activated for the inserted disc. Read the sections
on 'Child lock' and 'Releasing a disc' in the chapter on 'Access control
(child lock).
aThe menu on the screen is showing an 'X'
b Some DVD discs can be manufactured so that certain steps are required
before the disc can be played, or so that only limited operation is possible
during playback. When an 'X' appears on the screen the selected feature is
not possible.
aThe screen is showing regional code information
b Since DVD films are not normally released in all parts of the world at the
same time, all DVD players have a specific regional code. Discs can be given
a regional code. If the regional codes differ between the player and the
disc, playback is not possible.
b The regional code is shown on the label on the back of the machine.
b The regional code does not apply to recordable DVDs.
Problem
Inserting a disc
OPENING P01
1
Press the OPEN/CLOSE J button on the front. The disc tray will
open. While the disc tray is opening, ' OPENING' and then 'TRAY OPEN'
when the tray is fully open.
2
Carefully place the disc in the tray with the label facing up and press
PLAY G or OPEN/CLOSE J . 'CLOSING' and then 'READING' will
appear in the display. The information on the disc will be read.
How do I inserta double sided DVD?
Double-sided discs do not have labelling over the whole surface. The labelling
for each side is in the centre of the disc. To play a side its label must be
facing up.
?
Playback