Philips DVDR 77/00 - Manual (Page 36)

28
3
Press SYSTEM-MENU on the remote control. The menu bar
appears.
4
Select ' A ' symbol with D or C .
5
Select 'Installation' using B or A and confirm with C .
6
Select 'Manual search' using B or A and confirm with C .
Installation
Manual search
Channel/freq. CH
Entry/search 01
Programme number 01
TV channel name BBC1
Decoder Off
TV system PAL-BG
NICAM On
Fine tuning 0
To store
Press OK
7
In 'Channel/freq.', select the desired display using C .
' Freq.'(Frequency), 'CH'(Channel), 'S-CH'(Special/hyperband channel)
8
In 'Entry/search', enter the frequency or channel of the TV station
using the number buttons 0..9 .
aI don't know the channel for my TV station
b In this case, press C to start the automatic search. A changing channel
number/frequency number will appear on the TV screen.
Continue the automatic search until you have found the TV channel you
are looking for.
Problem
9
Using D or C in 'Programme number', select the programme
number you want to use for the TV channel, e.g. '01'.
How can I change the namel of a TV channel?
1 In 'TV channel name', press C .
2 Select the desired character position using D or C .
3 Change the character at the desired position with B or A .
4 Select the next character position in the same way.
5 Confirm with OK . Tip
How can I change the TV system of the TV channel?
In 'TV system', use D or C to select the TV system that produces the
least distortion of picture and sound.
Whatis NICAM?
NICAM is a digital sound transmission system. Using NICAM, you can
transmit either 1 stereo channel or 2 separate mono channels. However, if
reception is poor and the sound distorted you can turn off NICAM.
In 'NICAM', select 'Off' using
D or C .
How can I improve the automatic process for storing channels?
To change the automatic process for storing channels (fine tuning), select
'Fine tuning'.
Using
D or C you can try to fine-tune the TV channelmanually.
Tip
0
Press OK to store the TV channel.
A
To search for other TV channels, begin again at 8 .
B
To end, press SYSTEM-MENU .
Installing your DVD recorder