Paxar TC6032EM - Manual (Page 7)

Introduction 1-3
A t t a c h i n g t h e S a f e t y S t r a p
1. Turn the printer upside down, resting its top on the
table.
2. Take the thin end of the safety strap and push it
through the loop at the bottom of the printer handle
(near the battery compartment).
3. Push the thick end of the safety strap through the
thin end’s loop.
4. Pull the strap. It may be necessary to help the
thin end’s loop fit over the plastic piece in the
middle of the strap.
5. Pull the strap tight.