Paxar TC6032EM - Manual (Page 17)

Using Supplies 3-3
7. Place the supply roll in the supply holder so the supply feeds labels from
the bottom.
8. Load the supplies for the printing mode you want. See “Loading for Peel
Mode” or “Loading for Non-Peel Mode” for more information.
Loading for Peel Mode
To load supplies for peel mode:
1. Peel and discard the first four inches of labels from the backing paper.
2. Hold the printer upright and gently press down on the label deflector.
It may be stiff.
3. Feed all four inches of the backing paper over the peel bar and under
the applicator roller and the label deflector.
Label Deflector