Paxar TC6032EM - Manual (Page 15)

Using Supplies 3-1
U S I N G S U P P L I E S
The printer can use three types of supplies:
♦ Labels
♦ Tags
♦ Receipt Paper
There are two print modes. The way you load the supplies depends on the
print mode you use.
♦ Peel mode removes the backing paper from the supplies as it prints the
labels. This mode allows you to apply the label immediately. It is for
labels only.
♦ Non-Peel mode does not remove the backing paper. It is for labels
printed in a continuous strip, tags, and receipt paper.
L o a d i n g S u p p l i e s
To load supplies:
1. Turn on the printer.
2. If a date prompt appears, press Load. Otherwise, choose a format, and
then press Load. You see:
Load supplies
3. Press the latch buttons and open the supply cover.
3
Cover
Latch Buttons