Palm Wi-Fi Card - Manual (Page 6)

2 Using Your Palm Wi-Fi Card
CHAPTER 1 Using Your Palm ® Wi-Fi ® Card with the Treo ™ 700w Smartphone
Inserting and removing
the Wi-Fi card
Insert the card into your smartphone’s
expansion card slot with the Palm logo label
facing the front of the smartphone. Push the
card in until you hear the confirmation tone.
The top of the card extends from the slot
when the card is fully inserted.
To remove the card, push lightly against the
card with your thumb, and then slide the card
out of the expansion card slot.
We recommend that you remove the Wi-Fi card from your smartphone
in the following situations:
• When you are not using the card.
• When you are on an airplane.
• Before you turn on Flight Mode. If you leave the Wi-Fi card in the
expansion card slot, be aware that the Wi-Fi radio automatically
turns on and Flight Mode is canceled when you wake up the screen.
Similarly, if you insert the Wi-Fi card when your screen is on and
Flight Mode is also on, the Wi-Fi radio automatically turns on and
cancels Flight Mode.
[ * ] NOTE See “Regulatory Information” in the Treo 700w smartphone
User Guide for additional guidance on using the Wi-Fi card with your
Treo 700w smartphone.
Tip
When the Wi-Fi card
is inserted, tap the ?
icon in the upper-
right corner of any
Wi-Fi setup or
connection screen for
useful tips.