PYLE Audio PLA-4300D - Manual (Page 20)

frequency response
output power @ 14.4v DC, 50Hz
RMS Power at @ 4 Ohms
RMS Power at @ 2 Ohms
RMS Power at @ 1.3 Ohms
Maximum Power Output
400W MONO
700W MONO
1200W MONO
4000W MONO
20 Hz-250 Hz (-3dB)
input impedance 10K Ohms
Low-frequency information for subwoofer only.High efficient power
Stiffly regulated PWM power supplies. MOSFET switches maintain
rated power over a wide range of battery voltages.
Adjustable from 20Hz to 250Hz with a slope of 24dB per octave.This
allows for the adjustment of the upper point of the frequency bandwidth
and the respective subwoofer.
Adjustable from 15Hz to 40Hz with a slope of 24dB per octave.This allows
for the attenuation of frequencies that are mostly inaudible and cause
unnecessary strain on the amplifier.
Protection against thermal, overload and short circuit conditions.
This amplifier come complete with a compact remote GAIN CONTROLLER
which can be conveniently mounted on or under the dashboard of your
car.
Class-D design
power supplies
crossover low pass filter
high pass subsonic filter
protection circuitry
remote dash-mount gain control
input sensitivity
power supply voltage 14.4V DC Neg. Ground (10.5-16V)
dimensions (W x H x L)
mm
inches
1 Ohm min speaker lmpedance
40A x 2
281 x 59 x 381
11.06 x 2.32 x 15
T.H.D
S/N ration
fuse
>90dB
0.1%
250mV~4V Adjustable
PLA-4300D
features and specifications
Class-D MONO BLOCK AMPLIFIER PLA-4300D
18