Pella Replacement Window 80YV0102 - Manual (Page 9)

AWNING/
CASEMENT
Re-install Interior Frame Covers.
Note: Discard all Quick Release Bands before re-installing Interior Frame Covers.
I. Interior Frame Cover #3 (Head cover on Casement, Fixed and
Large Awning and the jamb cover without roto cover cut-out on
Standard Awning units):
Starting on one end of the frame,
insert the cover barbs of Interior
Frame Cover #3 into the frame kerfs.
Align the kerfs along the length of
the cover and press until the cover
"clicks" into place.
Note: Interior Frame Covers #3
contains compression springs which
allow the cover to be compressed
when re-installing Interior Frame
Covers #1 in Step 4K.
4I NOTE
Compression Spring
Compression Spring
location in
Cover 3
COVER 3
COVER 1
COVER 2
J. Interior Frame Cover #2 (Sill cover on Casement, Fixed and Large Awning
and a jamb cover with roto cover cut-out on Standard Awning units):
Place the cover support
referenced in Step C4 inside
the stop as shown. While
holding the support in place,
position the cover to align the
cover barbs with the frame
kerfs. Press the cover barbs into
the kerfs while working toward
the roto operator. Continue to
hold the support in place to
ensure proper placement of
the support over the operator.
Press the cover until it "clicks" into place.
Note: The cover support bracket may need to be repositioned over the
roto operator. The correct support position allows the cover barbs to be fully
seated into the frame kerfs.
4J
Cover Support Bracket 4J
K. Interior Frame Cover #1 (Jamb covers on Casement, Fixed and Large
Awning and the head and sill covers on Standard Awning units):
Insert the cover barbs of the first Interior Frame Cover #1 into the frame kerfs near
Interior Frame Cover #2 first. Rotate the Interior Frame Cover #1 towards Interior
Frame Cover #3 and align the kerfs along the frame, then press the cover until it
"clicks" into place. Repeat on the other cover.
L. Insert the roto cover, crank handle and lock handle.
See steps at the end of the instructions.