Panasonic BB-HCM331 - Manual (Page 43)

Installation/Troubleshooting
43
Making holes on mortar or concrete wall
1. Put flexible stand on the wall where you plan to install the camera and mark
the points where you are going to make holes.
2. Make holes with an electric drill. Insert plastic plugs (customer-provided) into
the holes and push them inside the holes with the hammer.
Note
Mortar walls break easily when drilling.
3. Mount the flexible stand by using the screws (accessories).
Change the drill depending on the
concrete wall or the tiled wall. Caulk around the holes
if necessary.
Plastic Plug
Hammer