Panasonic BB-HCM331 - Manual (Page 30)

Installation/Troubleshooting
30
5. When the Single Camera page is displayed, the setup is completed.
• If Security Warning window is displayed, click [Yes] (see page 33).
• See page 34 for Security Warning window when using Microsoft Windows
XP Service Pack 2.
Notes
•
See page 24 of the Operating Instructions on the Setup CD-ROM for the
Single Camera page.
• If you enable Internet access to the camera, follow the procedures below.
•
When you are using a router supporting UPnP TM
• When you are using a router not supporting UPnP TM
Follow the procedures shown on page 27.
1. Enable the Auto Port Forwarding feature on the UPnP page (see
page 70 of the Operating Instructions on the Setup CD-ROM).
2. Register with the Viewnetcam.com service on the Viewnetcam.com
page (see page 73 of the Operating Instructions on the Setup CD-
ROM).
3. Confirm the Internet access to the camera (see page 31). If you
cannot access the camera, see page 48.