Panasonic BB-HCM331 - Manual (Page 23)

Installation/Troubleshooting
23
9. When "Setup complete" is displayed, and click [To Single Camera page].
• The port number must be specified at the end of camera URL.
Using port 80:
http://(Cameraname).viewnetcam.com
or http://IP Address
Using any other port:
http://(Cameraname).viewnetcam.com:Port Number
or http://IP Address:Port Number
10. When the Single Camera page is displayed, the setup is completed.
Notes
• The banner is displayed only when Internet access is allowed on the
camera.
• To ensure that the most current image is displayed, Internet Explorer
should be configured as follows. This will not have any negative result on
normal use.
• When [Enable] was selected at
step 5 • When [Disable] was selected
at step 5
1. While viewing any website, Click [Tools] [Internet Options].
2. In the section "Temporary Internet Files", click [Settings] and check
[Every visit to the page].