Polycom DVD 729 - Manual (Page 18)

18
3139 246 12911
Setup Menu
Stop the program playback
0 During playback of the programmed tracks, press
STOP key. Then after you press PLAY key, the
DVD Player will resume normal playback.
Repeat the program playback
0 During playback of the programmed tracks, press
the REPEAT key. The programmed tracks can be
played again.
Display Dim
This function is used to adjust the brightness of
display on the front panel of the DVD Player.
1 Press the 34 keys to highlight DISPLAY DIM in
the GENERAL SETUP menu.
2 Enter its submenu by pressing the 2 key.
➜ Press the 34 keys to highlight 100%/70%/
40% item.
3 Press OK to confirm.
4 Press the 1 key to return to the GENERAL
SETUP menu.
Disc Lock
When the disc is locked, the player will store its
specific code into the memory for future
identification. For the next playback, the DVD
Player will prompt you to enter the password.
Then, press OK to load the disc.
1 Press the
34 keys to highlight DISC LOCK in
the GENERAL SETUP menu.
2 Enter its submenu by pressing the
2 key.
➜ LOCK: Lock the disc being played.
➜ UNLOCK: unlock the disc.
3 Press the
1 key to return to the GENERAL
SETUP menu.
Notes:
– When a locked disc is loading, the DVD Player
will prompt you to enter your password (842100
is the default password).
– To change the password , refer to the option
PASSWORD in the PREFERENCE SETUP menu .
Screen Saver
This function is used to turn the screen saver on
or off.
1 Press the 34 keys to highlight SCREEN SAVER
in the GENERAL SETUP menu.
2 Enter its submenu by pressing the 2 key.
3 Move the cursor by pressing the
34 keys to
highlight the selected item.
➜ ON: In STOP or No DISC mode, if no
actions are performed within 5~6 minutes, the
screen saver will be activated.
➜ OFF: Screen saver is disabled.
4 Press OK to confirm.
5 Press the
1 key to return to the GENERAL
SETUP menu.
01-28 DVD728 Eng 18/03/2003, 5:41 PM 18