Polycom DVD 729 - Manual (Page 12)

12
3139 246 12911
Operation
Repeat
DVD
Repeat chapter/title/disc
● To repeat the current chapter, press REPEAT.
● To repeat the current title, press REPEAT a
second time.
● To repeat the whole disc, press REPEAT a third
time.
● To exit REPEAT mode, press REPEAT again.
VCD CD
Repeat track/disc,
With PBC OFF,
● To repeat the current track, press REPEAT.
● To repeat the entire disc, press REPEAT a
second time.
● To exit Repeat mode, press REPEAT again.
Repeat A-B DVD VCD CD
DVD-Video Discs: repeat a sequence in a
title
Video and Audio CDs: repeat a sequence in
a track
1 Press REPEAT A-B at your chosen starting point.
2 Press REPEAT A-B again at your chosen end
point.
➜ The repeat sequence begins.
3 To exit the sequence, press REPEAT A-B.
5 Disc Resume
DVD VCD CD SVCD
This player can resume playback of the last 5
discs, even if the disc was ejected or the power
switched off.
1 Load one disc, which is one of the last 5 discs.
2 Press PLAY when DVD Player is recognizing the
disc. If the information of this disc has been
stored in the memory of DVD Player, it will be
played back from the stop point last time.
OSD (On-Screen Display)
DVD VCD SVCD
This function will provide some information
about your playing disc on the screen.
● Press DISPLAY key on the remote control.
Title Selection
1 Press 1 2 to highlight option Title number.
2 Press 3 4 to change the title number.
➜ DVD Player will playback selected title.
Chapter Selection
1 Press 1 2 to highlight option chapter number.
2 Press 3 4 to change the chapter number.
➜ DVD Player will playback selected chapter.
Time Search
● Press 1 2 to highlight time display area.
For DVD discs:
➜ CC refers to the elapsed time of the current
chapter. CR refers to the remaining time of the
current chapter. TC refers to the elapsed time of
the current title. TR refers to the remaining time
of the current title.
For Super VCD or VCD disc
➜ DC refers to the elapsed time of the current
disc. DR refers to the remaining time of the
current disc. TC refers to the elapsed time of the
current track. TR refers to the remaining time of
the current track.
Press
3 to make the selection.
● Press the 1 2 keys to highlight the item TIME
and you can play from any point of the disc.
➜ Enter hours, minutes and seconds from left to
right in the time edit box using remote control
numerical key pad.( e.g. 0:34:27)
➜ Press the OK key to confirm.
Zoom DVD VCD SVCD
The Zoom function allows you to change the
image size.
1 Press the ZOOM key to activate the function.
➜ Use the
341 2 key to view other parts of
the zoomed picture.
➜ Playback will continue.
2 Press the ZOOM key repeatedly to return to
the original size.
Note:
– The function is NOT available for some DVD
discs.
01-28 DVD728 Eng 18/03/2003, 5:41 PM 12