Patton electronic 1069 - Manual (Page 7)

7
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This
product has been thoroughly inspected and tested and is warranted for
one year for parts and labor. If any questions or problems arise during
installation or use of this product, contact Patton Electronics Technical
Support at +1 (301) 975-1007.
2.1 FEATURES
• VDSL2 - Easy to configure
• Auto-MDIX Ethernet
• Auto-Negotiating Ethernet 10/100BaseTX, Full/Half Duplex
• Extends up to 4x 10/100Base-TX Ethernet beyond 328-foot (100-
meter) limitation over a single twisted-pair or Cat5+
• POTS/ISDN splitter on board
• Transparent operation
• LED indicators for Power, DSL, CPE, and Ethernet Link/Activity
2.2 DESCRIPTION
The Patton Electronics Model 1069 OnSite CPE provides high-speed
VDSL2 connections to any standards-based VDSL2 DSLAM.
The Model 1069 can automatically forward LAN broadcasts, multicasts,
and frames across a 2-wire voice-grade twisted-pair link. The data is
passed transparently (unmodified) from the VDSL2 DSLAM through the
1069. The 1069 automatically adds and deletes MAC addresses, only
passing packets across the VDSL2 link.
Figure 1 on page 8 describes the rear panel ports on the Model 1069
VDSL CPE.