Panasonic PV-27DF4 - Manual (Page 14)

14
Connections
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Antenna Connection
Connect the cable from Antenna to the VHF/UHF terminal on the unit.
Cable Connection
Connect the cable supplied by your local cable company to VHF/UHF terminal on the unit.
Overtightening “Nut type” RF coaxial cables may damage jacks.
Finger tighten only.
• Turn off the power supply for all com po nents before making any connections.
• If the cables necessary for connecting a component to the system are not included with the
component or available as an option, you may need to fashion a cable to suit the component
concerned.
• Read the instruction manual for each system component care ful ly before connecting it.
Notes on con nec tions
Connecting the RF in Terminal
Note to CABLE system installer:
This re mind er is pro vid ed to call
the CABLE (Cable TV) System
Installer’s at ten tion to Article
820-40 of the NEC that pro vides
guide lines for proper grounding
and, in par tic u lar, specifies that
the cable ground shall be
con nect ed to the ground ing
system of the build ing, as close to
the point of cable entry as
practical.
CAUTION
Or
Cable Box
In from CABLE
Mixer
VHF
Antenna
UHF
Antenna