Pentax Optio T20 - Manual (Page 22)

Turning the Camera On and Off
20
1
Gett
ing Sta
rted
1
Press the power switch.
The camera turns on and is ready to take pictures (Capture mode).
If the Initial Setting screen appears when you turn the camera on, follow
the procedure on p.21 to make the initial settings.
2
Press the power switch again.
The camera turns off and the power indicator light goes off.
The memory card is checked automatically
when the camera turns on, and an icon for the
built-in memory or SD Memory Card appears
on the LCD monitor. a appears on the LCD
monitor when an SD Memory Card is inserted,
and + appears when there is no SD Memory
Card inserted. When + appears on the LCD
monitor, images and sound files will be saved
in the built-in memory.
The [Card locked] message appears when the write-protect switch on the
SD Memory Card is in the locked position. Images and sound cannot be
recorded when the write-protect switch is locked.
Turning the Camera On and Off
Checking the Memory Card
Power switch
10/25/2006 10/25/2006
14:25 14:25 14:25
38 38 38
10/25/2006
Memory status