Panasonic AG-1340P - Manual (Page 8)

8
Remote Controller Setup
Installing the Batteries
Insert the batteries with the polarity ( + and -)
correctly aligned.
Power Source for the Remote Controller:
The remote controller is powered by 2 AA, UM3
or R6 size batteries. The life of the batteries is
about one year, although this depends on the
frequency of use.
Precautions for Battery Replacement:
– Load the new batteries with their polarity (
+
and -) aligned correctly.
– Do not apply heat to the batteries, or an
internal short circuit may occur.
– If you do not intend to use the remote
controller for a long period of time, remove
the batteries and store them in a cool and dry
place.
– Remove spent batteries immediately and
dispose of them.
– Do not use an old and a new battery together,
and never use an alkaline battery with a
manganese battery.
– Do not use rechargeable batteries.