Paxar Monarch 9414 - Manual (Page 23)

Using the Pizza Hut Application 2-9
Loading Labels for Hot-Hold Items
1. Remove and discard the tape from a new roll of
labels.
2. Press the cover release buttons (on both sides of
the printer) towards the front of the printer. Lift
open the cover.
3. Adjust the supply guides to their widest position
by turning the dial.
4. Open the supply holders to their widest position by
pushing out the supply holder tabs.
5. Load the supply roll.
6. Press the supply under the supply guides and
adjust the supply guides so they just touch the
edges of the backing paper.
7. Open the peel bar cover by pushing down.
8. Change print modes to peel by switching the print
mode switch to the (1) position.
1=Peel Mode
O=Non-peel Mode
9. Remove the first two labels from the backing
paper.
Peel Bar
Cover
Print Mode
Sw itch