Panasonic UF-4100 - Manual (Page 58)

Receiving Documents
58
When your machine is set to this mode, your machine will not receive documents automatically. If you
receive a fax call, follow the procedure below to receive documents manually.
Setting the Telephone Mode
Operation of Telephone Mode
NOTE 1 This procedure is called "REMOTE RCV" and will only work on a touch tone phone. If your
extension phone is not a touch tone phone, press on the control panel of your fax
machine.
Telephone Mode
1 Change Fax Parameter No. 17 (RECEIVE MODE) to 1:
Tel.
(See page 33)
1 When your telephone rings, lift the handset of the External
Telephone.
If you hear a beep from the phone, it means someone wants to send
a fax. Or, if the caller answers and says he/she wants to send a fax,
then...
2 Remove any document from the ADF.
3a If you answered the call using the handset,
3b If you answered the call on an Extension phone,
or
within 1 second from the telephone key pad. (See Note 1)
Your machine will be activated remotely.
4 Hang up the phone.
START