Panasonic UF-4100 - Manual (Page 47)

Sending Documents
47
B
asi
c O
p
er
at
io
ns
If your machine's memory is full or you wish to send the document(s) immediately, use Direct Transmission.
Manual Number Dialling (Direct Transmission)
To dial the telephone number manually, follow the steps below.
NOTE
1 If you need a special access number to get an outside line, dial it first then press to
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2 If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press (represented by a "/").
The dialling mode will be changed from Pulse to Tone after dialling the digit "/".
Ex: 9 PAUSE TONE 5551234
3 To stop the transmission, press .
The display shows:
COMM. STOP?
Press to stop the transmission.
Direct Transmission
1
Set document(s) face down.
DOCUMENT SET
2 MEMORY XMT?
3
DOCUMENT SET
4 Enter a telephone number from the keypad.
Ex:
5551234 ❚
5
Your machine starts dialling the telephone number.
8 9
1
5 5 5 1 2 3 4
PAUSE
STOP
1